The PCA?3 is the perfect tool for busy technicians and boiler contractors who need to ensure safe operating conditions, determine combustion efficiency and perform emissions testing. Up to 4 sensors can be installed, measuring all gases simultaneously, including NOx (calculated from NO or measured from NO + NO2). Sensors can be added in the field without down time or replaced using B-Smart? pre-calibrated sensors. The PCA?3 calculates values like efficiency, CO2 and CO air-free to help monitor combustion processes effectively and accurately. The PCA?3 is designed for on-demand or semi-continuous sampling of light industrial, institutional, commercial and residential furnaces, boilers and appliances. It complies with regulations such as U.S. EPA test methods, EN 50379, CTM-030 and state/local protocols including SCAQMD. With sturdy metal gas and draft connectors, rugged construction, simple operation and quick, cost-effective maintenance, the PCA?3 is the workhorse of the industry.

The ECA 450 is an industrial grade analyzer ideal for professionals concerned about combustion efficiency, environmental compliance, or both. Accommodating up to seven sensors, simultaneous measurements and calculated parameters are evaluated to ensure that industrial equipment is meeting environmental regulations while burning safely and efficiently. The ECA 450 is designed for on-demand or semi-continuous sampling of industrial furnaces, boilers and other industrial combustion equipment. It complies with regulations such as U.S. EPA test methods, EN 50379, CTM-030 and state/local protocols including SCAQMD.

The MZF Draft Gauge is a portable manometer that enables contractors and technicians to quickly and accurately measure draft. The MZF is suitable for many applications, including checking flue pipes, chimneys, draft regulators, basement ventilation and more. It does not require tedious leveling or liquid refilling like other manometer types, so it is always ready for immediate use.

The Tru Pointe? 2100 is an ultra-versatile ultrasonic leak inspection system that can be used for both leak detection and mechanical PPM/inspection/troubleshooting. It is capable of finding leaks of any gas type, including refrigerants, air (compressed or vacuum) and nitrogen. The Tru Pointe? Ultra can also be used for thermal expansion valves, steam traps, bearings and more. The Tru Pointe? 2100 is available with the SoundBlaster?, an ultrasonic generator which can be useful when troubleshooting items that are not pressurized. It is also immune to wind and temperature/RH changes, ensuring you find only the leak or issue you?re looking for. It comes with a 1 year warranty.

The Informant?2 is a uniquely flexible leak detector designed for residential and commercial heating and cooling contractors. It?s the only dual-purpose leak detector that can be switched from refrigerants to combustible gases (and back again) in seconds. This one unit replaces two dedicated leak detectors, saving space in your truck and money in your wallet. The Informant?2 has a long, flexible neck for detecting leaks in hard-to-reach areas, dual LED scales to show relative leak sizes and an auto-zeroing feature for finding leaks in backgrounds where target gas is present. It is UL 913 certified (when using the combustible sensor only) for hazardous locations, and comes with a 1 year warranty including sensors.

The Tru Pointe? 1100 is an ultra-versatile ultrasonic leak inspection system that can be used for both leak detection and mechanical inspection/troubleshooting. It is capable of finding leaks of any gas type, including refrigerants, air (compressed or vacuum) and nitrogen. The Tru Pointe? Ultra can also be used for thermal expansion valves, steam traps, bearings and more. The Tru Pointe? 1100 can detect leaks from a distance ? as much as 30-40 feet. It is available with the SoundBlaster?, an ultrasonic generator which can be useful when troubleshooting items that are not pressurized. It comes with a 1 year warranty.

The Tru Pointe? Ultra is a low-cost handheld ultrasonic leak detector capable of finding leaks of any gas type, including refrigerants, air (compressed or vacuum) and nitrogen. The Tru Pointe? Ultra can also be used for thermal expansion valves and steam traps, making it a very versatile leak detector. The Tru Pointe? Ultra can detect leaks from a distance ? as much as 20-30 feet. It is available with options like noise-cancelling headphones and the SoundBlaster?, an ultrasonic generator which can be useful when troubleshooting items that are not pressurized. It comes with a 1 year warranty.

The True Spot? smoke test method has long been recognized as the accepted standard for oil burner smoke tests. Testing the smoke content of flue gases takes less than one minute and is easily determined using the smoke scale included with the instrument. The True Spot? is an indispensable part of any oil burner service job. High smoke levels can cause premature failure in the combustion appliance/equipment, can damage relatively expensive electronic combustion analyzers, and can indicate excessive fuel usage.

The Sling Psychrometer is an easy and affordable way to measure relative humidity levels quickly and accurately. It is ideal for many applications, including the measurement of conditions within indoor environments, storage areas, laboratories and more. The Sling Psychrometer measures RH between 10 and 100% (for dry bulb temperatures between 30 and 100 ?F) with an accuracy of ? 5%. It is covered by a 1 year warranty.

The Tru Pointe? IR is a handheld refrigerant leak detector that utilizes a long-life infrared sensor in a low-cost package to effectively pinpoint leaks of CFC, HFC, HCFC and HFO refrigerants. Ready for use in 30 seconds and with 8 hours of battery life in a single charge, the Tru Pointe? IR is truly a go-to tool. The Tru Pointe? IR has a long, flexible neck and the kit includes probe extensions (including a ?needle? probe) for detecting leaks in hard-to-reach areas. Selectable sensitivity settings and an LED scale shows relative leak sizes while the auto-zeroing feature enables leak detection in backgrounds where target gas is present. Includes 1 year warranty that also covers the IR sensor.

The IEQ Chek? is a handheld indoor air quality instrument capable of having 7 sensors installed simultaneously. Temperature and relative humidity sensors are always installed, with a selection of optional gas sensors including CO2, O2, CO, formaldehyde (HCHO), VOCs and others available. This superior flexibility makes the IEQ Chek? ideal for monitoring air quality in incubators, offices, schools, hotels or other public spaces. A large, backlit LCD shows all readings simultaneously and can store over 1 million readings using the optional SD card, which can then be analyzed and downloaded using Bacharach?s IQ Chek? software. The IEQ Chek? comes in a sturdy, hard-shell carrying case to protect your investment and is covered by a 2 year warranty (sensors are covered by a 1 year warranty).

The Snifit?+ is compact personal safety monitor ideal for HVAC contractors/technicians, home/safety inspectors and maintenance personnel who need to monitor CO for personal safety. With 4 alarm levels (low, high, STEL and TWA) and 3 alarm notifications (visual, audible and vibration), the Snifit?+ provides an extra level of protection when entering any space that could potentially contain CO. The Snifit?+ is ergonomically designed with an IP65 case, belt/pocket clip and lanyard loop. Its battery and sensor provide continuous monitoring for 2 years, so turn it on and let it go ? no need to turn it off.

The Leakator? Jr is an ideal instrument for pinpointing combustible gas leaks in a number of residential, commercial and industrial applications, including gas pipeline surveying and valve, regulator and gas meter inspection. It uses a long-life (5 years typical) sensor and is easy to operate with one hand, giving you a dependable, easy-to-use tool. The Leakator? Jr has a long, flexible neck for detecting leaks in hard-to-reach areas, an LED and audible sound for confirming the presence of leaks, and an automatic balance feature for finding leaks in backgrounds where target gas is present. It is UL 913 certified for hazardous locations, and comes with a 2 year warranty including sensor.

The Bacharach Mechanical Oil/Gas Testing Kits are complete kits that have HVAC technicians and contractors in mind. They include everything needed to perform a comprehensive combustion test, including the Fyrite? Classic (0-20% CO2), MZF Draft Gauge, True Spot? smoke tester, fire efficiency finder and a Tempoint? thermometer in a carrying case.

The H25-IR PRO is the latest industrial-grade gas leak analyzer capable of detecting 40+ refrigerant gases (standard model) in addition to R-290 (propane), R-600a (isobutane) and for special applications, CO2 and SF6. It uses Bacharach?s patented Advanced Leak Quantification (ALQ?) technology to quickly detect and quantify leaks, making this analyzer a truly powerful tool. The H25-IR PRO has many probe options, ranging from basic all the way to a ?smart? probe that mirrors the instrument?s user interface. Probes are available in 6 and 12 ft. lengths, enabling the H25-IR PRO to be customized to specific applications and user requirements. It also includes four (4) relays and a 4-20mA output and comes with a 2 year warranty.

The H-10 PRO is a highly responsive universal refrigerant leak detector using Bacharach?s tried-and-true heated diode sensor technology. It?s ultra-sensitive to all halogen-based, non-flammable CFC, HFC and HCFC refrigerants for reliable use in a wide range of refrigerant leak detection applications. The H-10 PRO has a long probe (4.5 ft.) for detecting leaks in hard-to-reach areas, visual and audible indicators to show relative leak sizes and an auto-zeroing feature (automatic mode only) for finding leaks in backgrounds where target gas is present. It has an internal sensor calibration reference to ensure optimum performance and comes with a 3 year warranty.

The Leakator? Jr is an ideal instrument for pinpointing combustible gas leaks in a number of residential, commercial and industrial applications, including gas pipeline surveying and valve, regulator and gas meter inspection. It uses a long-life (5 years typical) sensor and is easy to operate with one hand, giving you a dependable, easy-to-use tool. The Leakator? Jr has a long, flexible neck for detecting leaks in hard-to-reach areas, an LED and audible sound for confirming the presence of leaks, and an automatic balance feature for finding leaks in backgrounds where target gas is present. It is UL 913 certified for hazardous locations, and comes with a 2 year warranty including sensor.

Features Ambient air temperature Range: -4? to 999?F Accuracy: up to ?2?F Stack temperature Range: -4? to 2192?F Accuracy: up to ?4?F Oxygen Range: 0 to 20.9% Accuracy: ?0.3% Carbon monoxide Range: 0 to 4,000 ppm (H2 comp); 4,001 to 20,000 ppm (high range) Accuracy: up to ?5% or ?10 ppm Nitric oxide Range: 0 to 3,000 ppm Accuracy: up to ?5% or ?5 ppm Nitrogen dioxide Range: 0 to 500 ppm Accuracy: up to ?5% or ?5 ppm Sulfur dioxide Range:0 to 5,000 ppm Accuracy: up to ?5% or ?10 ppm Pressure/draft Range: -72 to +72 inwc Accuracy: up to ?2% or 0.02 inwc Combustion efficiency range: 0.1 to 100% Excess air range: 1.0 to 250% NOx range: 0 to 3,500 ppm Carbon dioxide range: 0 to fuel dependent maximum Calculated ranges: NOx referenced to % O2, CO referenced to % O2, NO referenced to % O2, NO2 referenced to % O2, SO2 referenced to % O2, Memory holds 500 complete logged combustion test records Selectable fuels: natural gas, oil ( #2, #4, #6), propane, coal, wood, kerosene, bagasse and digester gas

The PGM-IR offers superior performance and functionality for low ppm level leak detection of refrigerants, Carbon Dioxide, Nitrous Oxide or Sulfur Hexafluoride. A built-in library of 50 refrigerants enables the PGM-IR to accurately detect the smallest leaks at their source. The unit is immune to sudden changes in temperature or humidity and to over-exposure. The PGM-IR requires no zeroing of positive readings with extended exposure to gas. It has a data logging capacity of up to 200 readings. With its high flow rate, real-time ppm concentrations or TWA values are displayed instantly with corresponding audible tick-rate indicator to precisely pinpoint leaks. Rapid clearing time enables accurate ambient-air leak detection using the probe along a chiller or display-case. A re-zeroing algorithm and filter/bladder system allows the unit to be used in contaminated areas without affecting target gas readings. The rechargeable Li-ion battery provides a minimum of 8 hours of runtime for all-day usage.

The Fyrite? InTech? is the perfect tool for entry-level and residential technicians who need to ensure safe operating conditions and determine combustion efficiency. The InTech? features 6 fuels in the North American configuration to suit a wide variety of applications. The InTech? includes sensors for O2 and CO, with an option for an external NOx filter. The CO sensor can be replaced in the field without down time using B-Smart? pre-calibrated sensors. The InTech? calculates values like efficiency, CO2 and CO air-free to help monitor combustion processes effectively and accurately.